Tiles are sold by the box, and a box covers a fixed number of square metres. This calculator turns your room sizes into whole boxes, with the extra a tiler needs for cuts and breakages, so you can compare prices per box or per m² and buy everything from one batch.
How the tile calculator works
Each line is one area: a room, a passage, a shower wall or a patio. Type the length and width in metres, and anything to leave out, such as a kitchen island or a built-in cupboard, in square metres. For an L-shaped room, split it into two rectangles on two lines.
The calculator adds the areas, then adds the extra for cuts: 10% for a straight lay or brick bond, 15% for diagonal or herringbone, where every tile along the wall is cut at an angle. It divides that by the area of one tile to count the tiles, then rounds up to whole boxes using the pieces per box for the size you chose. Change the pieces per box if your supplier packs differently; it is printed on the box end and on the price ticket.
How much extra to buy
- 10% for a straight lay in a plain rectangular room with tiles of 600 mm or less.
- 12 to 15% for small rooms with many corners, passages, bathrooms with a toilet and vanity to cut round, and large 600 x 1200 tiles, where one broken tile is a big loss.
- 15 to 20% for diagonal, herringbone and chevron patterns, and for natural stone with colour variation that you want to sort.
Keep at least one full box after the job. Tiles from a later batch can differ in shade and size, so a spare box is the easiest way to replace a cracked tile in five years' time.
Tiles per square metre
A quick check for the numbers on a price ticket: 300 x 300 tiles are about 11.1 per m², 400 x 400 about 6.25, 450 x 450 about 4.9, 600 x 600 about 2.8, 800 x 800 about 1.6 and 600 x 1200 about 1.4 per m². A box of four 600 x 600 tiles covers 1.44 m², and a box of two 600 x 1200 tiles also covers 1.44 m². If a price is per box, divide it by the m² per box to compare it with a price per m².