Get a free quote

Free calculator

Grout calculator

Enter the area, the tile size and thickness and the joint width, and see how many kilograms and bags of grout you need, for cement grout or epoxy.

Grout calculatorGrout makers' formula, sizes in mm

1The tiles

2The grout

-

bags of grout

Grout per m²
-
Total incl. 15% losses
-
One bag covers about
-
Joint length per m²
-

Grout fills the joints between tiles, so how much you need depends on how many joints there are and how wide and deep they are. Small tiles and wide joints use far more grout than large tiles with narrow joints. This calculator uses the formula grout makers print on their technical sheets.

The grout formula

Grout in kg per m² = (tile length + tile width) ÷ (tile length × tile width) × joint width × tile thickness × density, with the sizes in millimetres. The density is about 1.6 for cement grout and 1.5 for epoxy. For example, 600 x 600 tiles 9 mm thick with 3 mm joints use (1,200 ÷ 360,000) × 3 × 9 × 1.6 = about 0.14 kg per m². 300 x 300 wall tiles 8 mm thick with 2 mm joints use about 0.17 kg per m², and 25 mm mosaics on a sheet can use more than 1 kg per m².

The calculator adds 15% for mixing losses, what is wiped off the face, and grout left in the bucket.

Which joint width

  • 1.5 to 2 mm: rectified porcelain and wall tiles with square, machined edges.
  • 3 mm: most floor tiles, and the usual minimum for 600 x 600 and larger on floors.
  • 5 mm and wider: rustic, handmade and terracotta tiles, cobble pavers and tiles that are not quite the same size.

Outside and on large floors, leave a soft movement joint, filled with silicone or a flexible sealant instead of grout, around the edges and about every 4 to 5 metres. Grout cannot take the movement and cracks first.

Cement or epoxy grout

Cement grout is cheap, easy to work and comes in many colours, but it absorbs stains unless sealed. Epoxy grout costs several times more, sets faster and is harder to clean off the tile face, but it is stain-proof and waterproof, so it suits kitchen counters, showers, pool tiles and commercial kitchens. See tile cleaning and sealing for grout sealers.

Frequently asked questions

How much grout do I need for 10 m²?
For 600 x 600 floor tiles with 3 mm joints, about 1.5 kg, so one 5 kg bag is plenty. For 300 x 300 tiles with 3 mm joints about 3 kg, and for mosaic sheets 10 kg or more. Type your own sizes into the calculator.
What does the tile thickness have to do with it?
The joint is filled to the full depth of the tile, so a 10 mm tile needs twice the grout of a 5 mm tile with the same joint. Check the thickness on the box; porcelain floor tiles are usually 8 to 10 mm, outdoor pavers 20 mm.
Should I buy all the grout at once?
Yes, from one batch, and mix the same amount of water each time. Grout from different batches, or mixed wetter or drier, can dry to a slightly different shade.
How long before I can walk on new grout?
Usually 24 hours for light foot traffic and about seven days before washing with strong cleaners or sealing. Fast-setting grouts are ready in a few hours; check the bag.

More calculators

Get a free tiling quote

Draw the room, pick the tile, and tell us where you are. Tile suppliers and tilers who work in your area quote you directly.

Setting-out planSent to tile suppliers and tilers near you

1The job

2The room (the plan counts the tiles)

3Where and when

Rooms and areas

4Request list (optional)

  1. 01
  2. 02
Up to 12 lines: tiles, materials or work.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable tile suppliers, flooring companies or tilers. See our privacy policy.

Get a free tiling quote